Difference between revisions of "3D printers"

From East Essex Hackspace
Jump to navigation Jump to search
Line 4: Line 4:
 
3D printing has been a hot topic for almost a decade and the Hackspace gives you access to several different printers. As they can be slightly noisy and generate fumes, they are based in a dedicated room along with the second smaller laser cutter.
 
3D printing has been a hot topic for almost a decade and the Hackspace gives you access to several different printers. As they can be slightly noisy and generate fumes, they are based in a dedicated room along with the second smaller laser cutter.
  
==FDM printing==
+
=FDM Printing=
  
 
The most common form of hobbyist 3D printing, these printers melt and fuse plastic filament building up objects in layers.
 
The most common form of hobbyist 3D printing, these printers melt and fuse plastic filament building up objects in layers.
  
===Lulzbot Minis===
+
==Lulzbot Minis==
  
 
The [[Lulzbot Minis]] are good general purpose [https://en.wikipedia.org/wiki/Fused_filament_fabrication FDM] printers for small to medium sized prints in plastic.
 
The [[Lulzbot Minis]] are good general purpose [https://en.wikipedia.org/wiki/Fused_filament_fabrication FDM] printers for small to medium sized prints in plastic.
  
===Ender-5 Plus===
+
==Ender-5 Plus==
  
 
The [[Ender-5 Plus]] is another [https://en.wikipedia.org/wiki/Fused_filament_fabrication FDM] printer, well suited to larger prints, but be warned, larger prints can take a very long time to complete.
 
The [[Ender-5 Plus]] is another [https://en.wikipedia.org/wiki/Fused_filament_fabrication FDM] printer, well suited to larger prints, but be warned, larger prints can take a very long time to complete.
  
===Food printer===
+
==Food printer==
  
 
The Hackspace has a printer it aspires to convert into one that can print in chocolate and other similar edible material for novelty purposes.
 
The Hackspace has a printer it aspires to convert into one that can print in chocolate and other similar edible material for novelty purposes.
  
==Resin SLA printing==
+
=Resin SLA Printing=
  
 
Predating FDM printing, [https://en.wikipedia.org/wiki/Stereolithography SLA] uses light to cure feed material which in hobbyist printers is usually a resin.
 
Predating FDM printing, [https://en.wikipedia.org/wiki/Stereolithography SLA] uses light to cure feed material which in hobbyist printers is usually a resin.
  
===Anycubic Photon===
+
==Anycubic Photon==
  
 
The [[Anycubic Photon]] is an SLA printer which used UV cured resin to print in very high detail, but the resin itself is expensive, hazardous and must be handled with care.
 
The [[Anycubic Photon]] is an SLA printer which used UV cured resin to print in very high detail, but the resin itself is expensive, hazardous and must be handled with care.
  
==3D Scanning==
+
=3D Scanning=
  
===Creality CR-Scan 01 3D Scanner===
+
==Creality CR-Scan 01 3D Scanner==
  
 
This enables very easy scanning of both small and large objects with no need for any lengthy preparation.
 
This enables very easy scanning of both small and large objects with no need for any lengthy preparation.

Revision as of 19:56, 25 October 2022

General Info

The 3D Printer Lab

3D printing has been a hot topic for almost a decade and the Hackspace gives you access to several different printers. As they can be slightly noisy and generate fumes, they are based in a dedicated room along with the second smaller laser cutter.

FDM Printing

The most common form of hobbyist 3D printing, these printers melt and fuse plastic filament building up objects in layers.

Lulzbot Minis

The Lulzbot Minis are good general purpose FDM printers for small to medium sized prints in plastic.

Ender-5 Plus

The Ender-5 Plus is another FDM printer, well suited to larger prints, but be warned, larger prints can take a very long time to complete.

Food printer

The Hackspace has a printer it aspires to convert into one that can print in chocolate and other similar edible material for novelty purposes.

Resin SLA Printing

Predating FDM printing, SLA uses light to cure feed material which in hobbyist printers is usually a resin.

Anycubic Photon

The Anycubic Photon is an SLA printer which used UV cured resin to print in very high detail, but the resin itself is expensive, hazardous and must be handled with care.

3D Scanning

Creality CR-Scan 01 3D Scanner

This enables very easy scanning of both small and large objects with no need for any lengthy preparation.

Official site: https://crealityofficial.co.uk/products/creality-cr-scan-01-3d-scanner-set

Charging

If you bring your own 3D printing filament, use of the FDM printers is free for members with a current subscription.

The Hackspace keeps a stock of generic filament in a range of colours for the FDM printers and if you would like to use this it requires a donation of £1 per hour printing to fund consumables and maintenance. Sadly charging also applies any failed prints for this reason and the FDM printers, while generally reliable are not absolutely so.

Pricing for Resin SLA printing is TBC.

Please place your donation in cash the donation box in the room.