Oooznest Workbee Z1+
The Ooznest Workbee Z1+ is a 2.5 axis CNC and has a bed size of 1m x 1m, but has a working area of 770mmx770mm
It sports a Mafel FM1000
Ooznest has a wiki on learning all about the Z1+ here https://learn.ooznest.co.uk/
This section is on how to use it https://learn.ooznest.co.uk/#Section_Ooznest_Usage_Guides
To connect to the Ooznest CNC whilst connected to wifi at the space, visit: http://172.28.10.65/
- Nominal Input Power: 1000W
- Nominal Speed (No Load): 4000 – 25000rpm
- Clamping Collar / Chuck: 43mm / 8mm max
Ultimately the software you use is up to you. The space does have a copy of Ventric vcarve Pro
Instructions can be found here https://wiki.eehack.space/index.php/VCarve_Pro_Makerspace_Edition
If you are a member, you can request a free licence which allows you to design & create the toolpaths. It will not generate gcode. For that, you will need to use one of the hackspacespace computers which has the full copy in and transfer it to it via USB.
Preparing files for WorkBee Z1+
This guide covers the maslow only, but you can select the settings for the Workbee as it's a well known and well supported version.