Toggle menu
Toggle preferences menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Knitting machine

From East Essex Hackspace
Revision as of 19:30, 18 December 2025 by TimN (talk | contribs) (Created page with "= Toyota KS858 Knitting Machine = The '''Toyota KS858''' is a domestic punchcard knitting machine used at East Essex Hackspace for flat-bed knitting projects. It is suitable for beginners through to intermediate users and supports a wide range of stitch patterns using standard punchcards. This page documents the specific machine and the complete set of accessories held by the hackspace. == Overview == * Manufacturer: Toyota * Model: KS858 * Type: Single-bed punchcard...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Toyota KS858 Knitting Machine

The Toyota KS858 is a domestic punchcard knitting machine used at East Essex Hackspace for flat-bed knitting projects. It is suitable for beginners through to intermediate users and supports a wide range of stitch patterns using standard punchcards.

This page documents the specific machine and the complete set of accessories held by the hackspace.

Overview

  • Manufacturer: Toyota
  • Model: KS858
  • Type: Single-bed punchcard knitting machine
  • Needle pitch: Standard gauge (4.5 mm)
  • Needles: Approx. 200 latch needles
  • Pattern system: 24-stitch punchcards
  • Drive: Manual carriage
  • Power: None required

Location

The Toyota KS858 and all associated accessories are stored together in the Craft & Textiles area of East Essex Hackspace.

Please ensure all parts are returned together after use.

Full Equipment Set (as held by the Hackspace)

The following items are present and shown in the reference photo. This represents the complete set currently owned by the hackspace.

Main Components

  • Toyota KS858 main needle bed
  • Carriage assembly
  • Integrated 24-stitch punchcard reader
  • Stitch size / tension dial
  • Pattern selection controls
  • Folding machine lid / protective cover

Ribbing Attachment

  • Toyota ribber needle bed
  • Ribber carriage
  • Ribber mounting arms
  • Ribber support brackets and fixings

The ribber allows production of 1x1 and other rib structures for cuffs, hems, and borders.

Yarn Handling

  • Yarn mast with tension unit
  • Yarn guide arms
  • Threading guides

Weights and Casting-On

  • Cast-on comb
  • Long bar weights
  • Claw weights (multiple sizes)
  • Weight hangers

Hand Tools

  • Single-needle transfer tools
  • Multi-needle transfer tool
  • Needle pusher / selector
  • Claw tools
  • Cleaning brush
  • Oil bottle

Pattern System

  • Built-in 24-stitch punchcard reader
  • 24-stitch punchcards
  • Punchcard storage box

Yarn Accessories

  • Skein holder (stored in the blue plastic box)

The skein holder is used to hold yarn in skein form, allowing smooth and even yarn feed into the tension unit.

Documentation

  • Original Toyota KS858 instruction manual
  • Pattern examples and reference sheets

What You Can Make

  • Scarves and shawls
  • Hats and flat panels
  • Jumpers and cardigans (assembled from panels)
  • Ribbed cuffs and hems (with ribber)
  • Textured punchcard fabrics
  • Sample swatches and test pieces

Yarn Compatibility

Recommended yarns:

  • Double knitting (DK)
  • 4-ply (with appropriate tension settings)
  • Light worsted yarns

Avoid:

  • Chunky or super-chunky yarns
  • Highly textured novelty yarns
  • Very fluffy or eyelash yarns

Always knit a test swatch before starting a full project.

Basic Setup

  1. Clamp the machine securely to a stable table
  2. Check all needles move freely
  3. Install the yarn mast and thread the yarn correctly
  4. Set stitch size using the tension dial
  5. Insert a punchcard if a pattern is required
  6. Cast on using waste yarn or a closed edge
  7. Hang weights evenly across the work

If the carriage does not move freely, stop immediately and check needle position and yarn path.

Safety Notes

  • Keep fingers clear of the needle bed while moving the carriage
  • Do not force jammed needles or the carriage
  • Weights can fall and cause injury if dropped
  • Tie back long hair and avoid loose clothing
  • Children must be supervised at all times
  • Do not store the machine under yarn tension

After Use

Please always:

  • Remove yarn, weights, and cast-on comb
  • Return needles to the non-working position
  • Wipe the needle bed with a soft cloth
  • Lightly oil if required
  • Pack all accessories back into the storage box
  • Report any damage or missing items via Discord or to a trustee

Training and Induction

An induction is required before first use.

Inductions are typically run during Craft & Textiles sessions or can be arranged via the Hackspace Discord.

Further Resources

  • Toyota KS858 instruction manual
  • Punchcard pattern libraries
  • Knitting machine tutorial videos
  • Hackspace Discord #craft-textiles channel

Hackspace Policy

This is shared equipment.

Please treat it with care, respect other users, and leave it ready for the next person.

Members are encouraged to contribute punchcard designs, help maintain the machine, or run workshops for others.