Difference between revisions of "WorkBee Z1+"
| Line 6: | Line 6: | ||
Ooznest has a wiki on learning all about the Z1+ here https://learn.ooznest.co.uk/ | Ooznest has a wiki on learning all about the Z1+ here https://learn.ooznest.co.uk/ | ||
| + | |||
| + | This section is on how to use it https://learn.ooznest.co.uk/#Section_Ooznest_Usage_Guides | ||
| + | |||
| + | ===Web connection=== | ||
| + | To connect to the Ooznest CNC whilst connected to wifi at the space, visit: http://172.28.10.65/ | ||
===Mafel FM1000== | ===Mafel FM1000== | ||
| Line 12: | Line 17: | ||
Nominal Speed (No Load): 4000 – 25000rpm | Nominal Speed (No Load): 4000 – 25000rpm | ||
Clamping Collar / Chuck: 43mm / 8mm max | Clamping Collar / Chuck: 43mm / 8mm max | ||
| + | |||
| + | ===Software=== | ||
| + | |||
| + | Ultimately the software you use is up to you. The space does have a copy of [https://www.vectric.com/products/vcarve-pro Ventric vcarve Pro] | ||
| + | |||
| + | If you are a member, you can request a free licence which allows you to design & create the toolpaths. It will not generate gcode. For that, you will need to use one of the hackspacespace computers which has the full copy in and transfer it to it via USB. | ||
Revision as of 08:54, 19 October 2022
Oooznest Workbee Z1+
The Ooznest Workbee Z1+ is a 2.5 axis CNC and has a bed size of 1m x 1m, but has a working area of 770mmx770mm
It sports a Mafel FM1000
Ooznest has a wiki on learning all about the Z1+ here https://learn.ooznest.co.uk/
This section is on how to use it https://learn.ooznest.co.uk/#Section_Ooznest_Usage_Guides
Web connection
To connect to the Ooznest CNC whilst connected to wifi at the space, visit: http://172.28.10.65/
=Mafel FM1000
Nominal Input Power: 1000W Nominal Speed (No Load): 4000 – 25000rpm Clamping Collar / Chuck: 43mm / 8mm max
Software
Ultimately the software you use is up to you. The space does have a copy of Ventric vcarve Pro
If you are a member, you can request a free licence which allows you to design & create the toolpaths. It will not generate gcode. For that, you will need to use one of the hackspacespace computers which has the full copy in and transfer it to it via USB.
