WorkBee Z1+: Difference between revisions
No edit summary |
No edit summary |
||
| (8 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
==Oooznest Workbee Z1+== | ==Oooznest Workbee Z1+== | ||
The Ooznest Workbee Z1+ is a 2.5 axis CNC and has a bed size of 1m x 1m, but has a working area of 770mmx770mm | The [https://ooznest.co.uk/product/original-workbee-z1plus-cnc-machine/#tab-technical Ooznest Workbee Z1+] is a 2.5 axis CNC and has a bed size of 1m x 1m, but has a working area of 770mmx770mm | ||
It sports a Mafel FM1000 | It sports a Mafel FM1000 | ||
| Line 7: | Line 7: | ||
Ooznest has a wiki on learning all about the Z1+ here https://learn.ooznest.co.uk/ | Ooznest has a wiki on learning all about the Z1+ here https://learn.ooznest.co.uk/ | ||
This section is on how to use it https://learn.ooznest.co.uk/#Section_Ooznest_Usage_Guides | |||
Nominal Input Power: 1000W | ===Web connection=== | ||
Nominal Speed (No Load): 4000 – 25000rpm | To connect to the Ooznest CNC whilst connected to wifi at the space, visit: http://172.28.10.65/ | ||
Clamping Collar / Chuck: 43mm / 8mm max | |||
===Mafel FM1000=== | |||
* Nominal Input Power: 1000W | |||
* Nominal Speed (No Load): 4000 – 25000rpm | |||
* Clamping Collar / Chuck: 43mm / 8mm max | |||
===Collets Available=== | |||
* 1/4" | |||
* 1/8" | |||
* 8mm | |||
===Software=== | |||
Ultimately the software you use is up to you. The space does have a copy of [https://www.vectric.com/products/vcarve-pro Ventric vcarve Pro] | |||
Instructions can be found here https://wiki.eehack.space/index.php/VCarve_Pro_Makerspace_Edition | |||
If you are a member, you can request a free licence which allows you to design & create the toolpaths. It will not generate gcode. For that, you will need to use one of the hackspacespace computers which has the full copy in and transfer it to it via USB. | |||
===Preparing files for WorkBee Z1+=== | |||
This guide covers the maslow only, but you can select the settings for the Workbee as it's a well known and well supported version. | |||
https://wiki.eehack.space/index.php/Preparing_files_in_VCarve_Pro | |||
===Fusion 360 Configuration=== | |||
A gcode post processor needs configuring in Fusion 360, details are available here: [https://learn.ooznest.co.uk/Wiki/WorkBee_Firmware_Releases#Section_Fusion360] | |||
Revision as of 13:43, 8 March 2023
Oooznest Workbee Z1+
The Ooznest Workbee Z1+ is a 2.5 axis CNC and has a bed size of 1m x 1m, but has a working area of 770mmx770mm
It sports a Mafel FM1000
Ooznest has a wiki on learning all about the Z1+ here https://learn.ooznest.co.uk/
This section is on how to use it https://learn.ooznest.co.uk/#Section_Ooznest_Usage_Guides
Web connection
To connect to the Ooznest CNC whilst connected to wifi at the space, visit: http://172.28.10.65/
Mafel FM1000
- Nominal Input Power: 1000W
- Nominal Speed (No Load): 4000 – 25000rpm
- Clamping Collar / Chuck: 43mm / 8mm max
Collets Available
- 1/4"
- 1/8"
- 8mm
Software
Ultimately the software you use is up to you. The space does have a copy of Ventric vcarve Pro
Instructions can be found here https://wiki.eehack.space/index.php/VCarve_Pro_Makerspace_Edition
If you are a member, you can request a free licence which allows you to design & create the toolpaths. It will not generate gcode. For that, you will need to use one of the hackspacespace computers which has the full copy in and transfer it to it via USB.
Preparing files for WorkBee Z1+
This guide covers the maslow only, but you can select the settings for the Workbee as it's a well known and well supported version.
https://wiki.eehack.space/index.php/Preparing_files_in_VCarve_Pro
Fusion 360 Configuration
A gcode post processor needs configuring in Fusion 360, details are available here: [1]