File:Label Printer.jpg: Difference between revisions

Latest revision as of 13:27, 19 November 2024

A small Brother QL800 label printer sitting on a 3D printed base. You can't see it but there is a Raspberry Pi inside which acts as a print server.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	13:27, 19 November 2024		4,080 × 2,296 (3.83 MB)	NCMReynolds (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	motorola
Camera model	moto g84 5G
ISO speed rating	1,541
F Number	f/1.8
Exposure time	3/100 sec (0.03)
Lens focal length	5.56 mm
Date and time of data generation	13:09, 19 November 2024
Latitude	51° 35′ 57.88″ N
Longitude	0° 40′ 2.3″ E
Altitude	0 meters above sea level
Width	4,080 px
Height	2,296 px
Software used	Google
File change date and time	13:09, 19 November 2024
Orientation	Normal
Y and C positioning	Centered
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Exposure Program	Normal program
Sensing method	Undefined
DateTimeDigitized subseconds	478059
DateTimeOriginal subseconds	478059
DateTime subseconds	478059
Flash	Flash did not fire, compulsory flash suppression
Light source	D65
Metering mode	Center weighted average
Scene capture type	Standard
Focal length in 35 mm film	24 mm
Maximum land aperture	1.69 APEX (f/1.8)
APEX exposure bias	0
Digital zoom ratio	1
Date and time of digitizing	13:09, 19 November 2024
White balance	Auto white balance
APEX brightness	−3.17
Exposure mode	Auto exposure
APEX aperture	1.69
Scene type	A directly photographed image
Color space	sRGB
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	5.058
Exif version	2.2
Supported Flashpix version	1
GPS time (atomic clock)	13:09
GPS date	19 November 2024