Galvo Laser: Difference between revisions
(Created page with " The space has purchased a 100w JPT MOPA Galvo Laser. Galvo lasers can engrave and cut metals. The MOPA function allows a lot more control and can on metals such as stainless, "engrave" in colour. In reality this is just localised heating to produce heat marks, but it's pretty cool. Our existing lightburn agreement covers the pro version of the software, so both lasers can be used with Lightburn, however there are significant differences in setup, specifically becaus...") |
No edit summary |
||
| Line 1: | Line 1: | ||
[[File:100w JPT MOPA Galvo Laser.jpg|left|thumb]] | |||
== About == | |||
The space has purchased a 100w JPT MOPA Galvo Laser. Galvo lasers can engrave and cut metals. | The space has purchased a 100w JPT MOPA Galvo Laser. Galvo lasers can engrave and cut metals. | ||
| Line 7: | Line 8: | ||
Our existing lightburn agreement covers the pro version of the software, so both lasers can be used with Lightburn, however there are significant differences in setup, specifically because of the difference in boards. | Our existing lightburn agreement covers the pro version of the software, so both lasers can be used with Lightburn, however there are significant differences in setup, specifically because of the difference in boards. | ||
'''You MUST have an induction to use this device.''' | |||
'''Do not bypass any of the interlocks or safety devices''' | |||
== Danger Will Robinson! == | |||
This laser can and will take your eyesight. Even the £300 safety goggles you can buy only afford you 10 seconds of protection. Next to the lathe, the Galvo Laser is one of the most dangerous tools in the hackspace. '''You cannot use this without induction''' | |||
== Inductions == | |||
Laser Everything's Galvo Crash Course | It is suggested to start with Laser Everything's Galvo Crash Course. This covers all aspects of the machine including setup on your laptop if you want to use your own lightburn instance. | ||
=== Laser Everything's Galvo Crash Course === | |||
https://youtube.com/playlist?list=PLoBR3k35202Yjc1yMfPZsY8EDh_pmcaa2&si=nRVl7qXiDLy2w2_l | https://youtube.com/playlist?list=PLoBR3k35202Yjc1yMfPZsY8EDh_pmcaa2&si=nRVl7qXiDLy2w2_l | ||
The rest of the induction will only cover the safety aspects of using our specific machine at present. | |||
== Machine Storage == | |||
The proposed space for the machine to live is in the CO2 laser room. It needs to be wheeled to the metal workshop and connected to the extractor as metal fumes are not good to breathe in. | |||
'''Do not use the machine or operate the fan between 10pm and 8am.''' | |||
Revision as of 11:22, 5 January 2025
About
The space has purchased a 100w JPT MOPA Galvo Laser. Galvo lasers can engrave and cut metals.
The MOPA function allows a lot more control and can on metals such as stainless, "engrave" in colour. In reality this is just localised heating to produce heat marks, but it's pretty cool.
Our existing lightburn agreement covers the pro version of the software, so both lasers can be used with Lightburn, however there are significant differences in setup, specifically because of the difference in boards.
You MUST have an induction to use this device.
Do not bypass any of the interlocks or safety devices
Danger Will Robinson!
This laser can and will take your eyesight. Even the £300 safety goggles you can buy only afford you 10 seconds of protection. Next to the lathe, the Galvo Laser is one of the most dangerous tools in the hackspace. You cannot use this without induction
Inductions
It is suggested to start with Laser Everything's Galvo Crash Course. This covers all aspects of the machine including setup on your laptop if you want to use your own lightburn instance.
Laser Everything's Galvo Crash Course
https://youtube.com/playlist?list=PLoBR3k35202Yjc1yMfPZsY8EDh_pmcaa2&si=nRVl7qXiDLy2w2_l
The rest of the induction will only cover the safety aspects of using our specific machine at present.
Machine Storage
The proposed space for the machine to live is in the CO2 laser room. It needs to be wheeled to the metal workshop and connected to the extractor as metal fumes are not good to breathe in.
Do not use the machine or operate the fan between 10pm and 8am.