WorkBee Z1+: Difference between revisions
No edit summary |
No edit summary |
||
| Line 12: | Line 12: | ||
To connect to the Ooznest CNC whilst connected to wifi at the space, visit: http://172.28.10.65/ | To connect to the Ooznest CNC whilst connected to wifi at the space, visit: http://172.28.10.65/ | ||
===Mafel FM1000== | ===Mafel FM1000=== | ||
Nominal Input Power: 1000W | Nominal Input Power: 1000W | ||
| Line 21: | Line 21: | ||
Ultimately the software you use is up to you. The space does have a copy of [https://www.vectric.com/products/vcarve-pro Ventric vcarve Pro] | Ultimately the software you use is up to you. The space does have a copy of [https://www.vectric.com/products/vcarve-pro Ventric vcarve Pro] | ||
Instructions can be found here https://wiki.eehack.space/index.php/VCarve_Pro_Makerspace_Edition | |||
If you are a member, you can request a free licence which allows you to design & create the toolpaths. It will not generate gcode. For that, you will need to use one of the hackspacespace computers which has the full copy in and transfer it to it via USB. | If you are a member, you can request a free licence which allows you to design & create the toolpaths. It will not generate gcode. For that, you will need to use one of the hackspacespace computers which has the full copy in and transfer it to it via USB. | ||
Revision as of 07:56, 19 October 2022
Oooznest Workbee Z1+
The Ooznest Workbee Z1+ is a 2.5 axis CNC and has a bed size of 1m x 1m, but has a working area of 770mmx770mm
It sports a Mafel FM1000
Ooznest has a wiki on learning all about the Z1+ here https://learn.ooznest.co.uk/
This section is on how to use it https://learn.ooznest.co.uk/#Section_Ooznest_Usage_Guides
Web connection
To connect to the Ooznest CNC whilst connected to wifi at the space, visit: http://172.28.10.65/
Mafel FM1000
Nominal Input Power: 1000W Nominal Speed (No Load): 4000 – 25000rpm Clamping Collar / Chuck: 43mm / 8mm max
Software
Ultimately the software you use is up to you. The space does have a copy of Ventric vcarve Pro
Instructions can be found here https://wiki.eehack.space/index.php/VCarve_Pro_Makerspace_Edition
If you are a member, you can request a free licence which allows you to design & create the toolpaths. It will not generate gcode. For that, you will need to use one of the hackspacespace computers which has the full copy in and transfer it to it via USB.