3D printers: Difference between revisions
(Update 3D scanner) |
|||
| Line 4: | Line 4: | ||
3D printing has been a hot topic for almost a decade and the Hackspace gives you access to several different printers. As they can be slightly noisy and generate fumes, they are based in a dedicated room along with the second smaller laser cutter. | 3D printing has been a hot topic for almost a decade and the Hackspace gives you access to several different printers. As they can be slightly noisy and generate fumes, they are based in a dedicated room along with the second smaller laser cutter. | ||
== | ==3D Scanning== | ||
===Creality CR-Scan 01 3D Scanner=== | |||
This enables very easy scanning of both small and large objects with no need for any lengthy preparation. | |||
Official site: https://crealityofficial.co.uk/products/creality-cr-scan-01-3d-scanner-set | |||
==FDM printing== | ==FDM printing== | ||
Revision as of 19:55, 25 October 2022
General Info
3D printing has been a hot topic for almost a decade and the Hackspace gives you access to several different printers. As they can be slightly noisy and generate fumes, they are based in a dedicated room along with the second smaller laser cutter.
3D Scanning
Creality CR-Scan 01 3D Scanner
This enables very easy scanning of both small and large objects with no need for any lengthy preparation.
Official site: https://crealityofficial.co.uk/products/creality-cr-scan-01-3d-scanner-set
FDM printing
The most common form of hobbyist 3D printing, these printers melt and fuse plastic filament building up objects in layers.
Lulzbot Minis
The Lulzbot Minis are good general purpose FDM printers for small to medium sized prints in plastic.
Ender-5 Plus
The Ender-5 Plus is another FDM printer, well suited to larger prints, but be warned, larger prints can take a very long time to complete.
Food printer
The Hackspace has a printer it aspires to convert into one that can print in chocolate and other similar edible material for novelty purposes.
Resin SLA printing
Predating FDM printing, SLA uses light to cure feed material which in hobbyist printers is usually a resin.
Anycubic Photon
The Anycubic Photon is an SLA printer which used UV cured resin to print in very high detail, but the resin itself is expensive, hazardous and must be handled with care.
Charging
If you bring your own 3D printing filament, use of the FDM printers is free for members with a current subscription.
The Hackspace keeps a stock of generic filament in a range of colours for the FDM printers and if you would like to use this it requires a donation of £1 per hour printing to fund consumables and maintenance. Sadly charging also applies any failed prints for this reason and the FDM printers, while generally reliable are not absolutely so.
Pricing for Resin SLA printing is TBC.
Please place your donation in cash the donation box in the room.